LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2025 >> Outback Premium >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Auto Start Stop System (Diagnostics) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0C2E: Electric/Auxiliary Transmission Fluid Pump Control Module Feedback Signal High >> General Description >> Execution Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Execution Condition

Secondary parameters Execution condition
After IG ON 1 s or more
[Electric Fluid Pump Relay (Auto Start Stop)] ON
[System Voltage (Auto Start Stop)] 10.5 V or more
and
Less than 15 V