Right Transfer Case, Input Shaft, and Output Drive Shaft Installation
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
CALLOUT AND COMPONENT NAME TABLE
| Callout | Component Name |
|---|---|
|
CAUTION:
Refer to FASTENER NOTICE
. Fastener Tightening Specifications: Refer to FASTENER TIGHTENING SPECIFICATIONS - TRANSFER CASE - GETRAG 760 . |
|
| 1 | Transfer Case Half Locating Pins |
| 2 | Transfer Case Rear Output Drive Shaft |
| 3 | Transfer Case Input Shaft Tip: Install the input and output shafts as a set with the splines engaged. |
| 4 | Transfer Case Seal |
| 5 | Transfer Case - Right |
| 6 | Transfer Case Half Bolts (Qty: 11) Tightening torque 29 N.m (21 lb ft) |