Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing ECT Sensor

Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .

Install the ECT sensor.
Tightening torque

Tighten the sensor to 22 N.m (16 lb ft) .

Fig 2: Connecting Engine Wiring Harness Electrical Connector To ECT Sensor
Courtesy of SUZUKI OF AMERICA CORP.
Connect the engine wiring harness electrical connector (4) to the ECT sensor.