Clutch Pedal Position (CPP) Switch (M/T)
WARNING: This page is about a different car, the 1996 Suzuki X-90 and 1996 Suzuki Sidekick. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect electrical connector at CPP switch, located near top of clutch pedal. SeeFigure . Remove CPP switch from mounting bracket.
- Using ohmmeter, check continuity between electrical terminals on CPP switch. Continuity should exist with plunger on CPP switch fully outward and no continuity should exist with plunger fully depressed. Replace CPP switch if defective.
- Reinstall CPP switch. Adjust CPP switch. See CLUTCH PEDAL POSITION (CPP) SWITCH (M/T) under ADJUSTMENTS.