Clutch Pedal Position (CPP) Switch Circuit Check (M/T)
WARNING: This page is about a different car, the 1996 Suzuki X-90 and 1996 Suzuki Sidekick. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition is off. Disconnect electrical connector at CC ECU. Turn ignition on. Using voltmeter, check voltage between ground and CC ECU connector terminal No. 6 with clutch pedal depressed. SeeFigure . Voltage should be 10-14 volts.
- If voltage is not within specification, check fuses, wiring and electrical connectors for related wiring circuit. See appropriate wiring diagram under WIRING DIAGRAMS . Repair fuses, wiring or electrical connectors as necessary.
- If fuses, wires and electrical connectors are okay, check CPP switch. See CLUTCH PEDAL POSITION (CPP) SWITCH (M/T) under COMPONENT TESTING.