Indicator Light Circuit Check
WARNING: This page is about a different car, the 1995 Suzuki Sidekick. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition is off. Disconnect electrical connector at CC ECU. Turn ignition on. Using voltmeter, check voltage between ground and CC ECU connector terminal No. 8 (3-speed A/T and M/T) or terminal No. 17 (4-speed A/T). See Figure or Figure . Voltage should be 10-14 volts.
- If voltage is not within specification, check fuses, wiring and electrical connectors for related wiring circuit. See appropriate wiring diagram under WIRING DIAGRAMS . Repair fuses, wiring or electrical connectors as necessary. If fuses, wiring and electrical connectors are okay, replace indicator light bulb.