Automatic Stop Test

WARNING: This page is about a different car, the 1996 Suzuki X-90. However, it is still accessible from the selected car via links, so may be relevant.

Connect a jumper wire from battery voltage to wiper motor connector terminal No. 3. Ground wiper motor at Black lead or housing. SeeFig 1 .
Use another jumper wire to connect terminals No. 1 and 4. Motor should stop at park position. Remove jumper wire and connect same terminals again. Motor should stop at same point. If motor does not stop at same point, replace motor.

Fig 1: Identifying Front Wiper Motor Connector Terminals

Courtesy of SUZUKI OF AMERICA CORP.