Set/Coast, ACCEL/Resume & Cancel Switch Assembly

Disconnect electrical connector for switch assembly at steering column. It may be necessary to remove switch assembly from steering column. For Sidekick see STEERING COLUMN SWITCHES , for X90 see STEERING COLUMN SWITCHES article.
Note electrical connector terminal identification. SeeFigure . Using ohmmeter, check for continuity between specified terminals with each switch in ON position. See SWITCH ASSEMBLY CONTINUITY . Replace switch assembly if continuity does not exist as specified.

SWITCH ASSEMBLY CONTINUITY ⁽¹⁾

Switch Application

Terminals No.

SET/COAST

1 & 3

ACCEL/RESUME

2 & 3

CANCEL

3 & 4

⁽¹⁾	Switch continuity is checked w/switch in ON position.