Power Windows Inoperative
- Turn ignition on. Ensure fuse is okay. Replace fuse as necessary. Locate circuit breaker. SeeFigure . Ensure battery voltage is present at both circuit breaker terminals. If voltage does not exist at either terminal, inspect and repair circuit as needed. See WIRING DIAGRAMS .
- Remove power window main switch. Using voltmeter, ensure voltage is present at harness connector Blue/White wire. If voltage does not exist, inspect and repair circuit as needed.
- If voltage exists, ensure continuity exists between switch harness connector Black wire and vehicle ground.
- If continuity exists, replace power window main switch. If continuity does not exist, inspect and repair circuit as needed.