Set/Coast, ACCEL/Resume & Cancel Switch

WARNING: This page is about a different car, the 1995 Suzuki Sidekick. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect electrical connector for switch assembly at steering column. It may be necessary to remove switch assembly from steering column. See appropriate STEERING COLUMN SWITCHES article.
Note electrical connector terminal identification. SeeFigure . Using ohmmeter, check for continuity between specified termina ls with each switch in ON position. See SWITCH ASSEMBLY CONTINUITY . Replace switch assembly if continuity does not exist as specified.

SWITCH ASSEMBLY CONTINUITY ⁽¹⁾

Switch Application

Terminals No.

SET/COAST

1 & 3

ACCEL/RESUME

2 & 3

CANCEL

3 & 4

⁽¹⁾	Switch continuity is checked w/switch in ON position.