Set/Coast, ACCEL/Resume & Cancel Switch Circuit Check
WARNING: This page is about a different car, the 1996 Suzuki X-90 and 1996 Suzuki Sidekick. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition is off. Disconnect electrical connector at CC ECU. Using ohmmeter, check continuity between ground and CC ECU connector terminal No. 12 with ACCEL/RESUME switch in ON position. SeeFigure . Continuity should exist.
- Using ohmmeter, check continuity between ground and CC ECU terminal No. 13 with SET/COAST switch in ON position. Continuity should exist.
- Using ohmmeter, check continuity between ground and CC ECU terminal No. 1 with CANCEL switch in ON position. Continuity should exist.
- If no continuity exists in any designated switch position, check wiring and electrical connectors for related wiring circuit. See appropriate wiring diagram under WIRING DIAGRAMS . Repair wiring or electrical connectors as necessary.
- If wiring and electrical connectors are okay, check SET/COAST, ACCEL/RESUME & CANCEL SWITCH. See SET/COAST, ACCEL/RESUME & CANCEL SWITCH under COMPONENT TESTING.