October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Rear Wheel Alignment

1. Loosen right and left No. 2 control rod inner nuts.
2. Adjust toe to satisfy specification by turning right and left No. 2 control rod inner bolts (cam bolts) by the same, amount.
3. After adjustment, tighten right and left nuts to specified torque while holding cam bolt with another wrench to prevent it from turning.
Tightening Torque (a): 90 Nm (65 ft. lbs.)
4. Install suspension frame cap.