Set/Coast, ACCEL/Resume & Cancel Switch Assembly

Disconnect harness connector for switch assembly at steering column. It may be necessary to remove switch assembly from steering column. See STEERING COLUMN SWITCHES article.
Note connector terminal identification. SeeFigure . Using ohmmeter, check for continuity between specified terminals with each switch in ON position. See SWITCH ASSEMBLY CONTINUITY . Replace switch assembly if continuity does not exist.

SWITCH ASSEMBLY CONTINUITY ⁽¹⁾

Switch Application

Terminals No.

SET/COAST

1 & 3

ACCEL/RESUME

2 & 3

CANCEL

3 & 4

⁽¹⁾	Switch continuity is checked with switch in ON position.