LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2000 >> Swift GL, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> Generators & Regulators >> Bench Testing >> Stator
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Bench Testing: Stator

  1. To test stator for an open circuit, use ohmmeter to check for continuity between each electrical lead on stator. See Fig 1 .
  2. Continuity should exist between all electrical leads. Replace stator if no continuity exists between any electrical leads. See OVERHAUL  .
  3. To test stator for a grounded circuit, use ohmmeter to check for continuity between each electrical lead on stator and the outside of the stator. See Fig 1 . Replace stator if continuity exists between any electrical lead and the outside of the stator. See OVERHAUL  .
Fig 1: Testing Stator For Open Or Grounded Circuits (Typical)
G96H10717Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals