DTC P0112: Intake Air Temperature (IAT) Sensor Circuit Low Input
- Connect scan tool to Data Link Connector (DLC). Turn ignition on. Select IAT sensor parameter on scan tool. If scan tool displays 302°F (150°C), go to next step. If scan tool displays near ambient temperature, check for an intermittent problem. See TROUBLE SHOOTING - NO CODES article.
- Disconnect IAT sensor harness connector. If scan tool display drops to -40°F (-40°C), replace IAT sensor. If scan tool display is not as specified, check Light Blue wire for a short to ground. Repair as necessary. If wire is okay, replace PCM and retest system.