DTC Confirmation Test
- Ensure intake air temperature is 18°F (-8°C) or more, vehicle is at an altitude of 8000 feet or below, engine coolant temperature is at 18-230°F (-8-110°C), fuel tank is at least 1/4 full, and barometric pressure is 75 kPa or more. Turn ignition off, connect scan tool and turn ignition on. Clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Drive vehicle at speeds of 35 MPH or more for 2 minutes or more. Stop vehicle and allow it to idle for one minute.
- Check for DTCs P0131 and P0132. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If DTCs are not set, check completion status of HO2S monitoring test in READINESS TESTS mode. If testing has not been completed, go to next step.
- Drive vehicle at speeds of 35 MPH or more for 2 minutes or more. Stop vehicle and allow it to idle for one minute. Check for DTCs P0131 and P0132. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM.