LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Brake Modulator Assembly Replacement (Delphi) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the brake modulator assembly.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the mounting bracket bolts on the hydraulic unit.

    Tighten:  Tighten the torque ABS mounting bracket bolts to 22 N.m (16 lb ft).

  3. Install the brake pipes fitting nuts from the hydraulic unit.

    Tighten:  Tighten the torque brake pipe fitting nuts to 16 N.m (12 lb ft).

  4. Connect the ABS wiring harness connector to its socket on the EBCM.
  5. Connect the negative battery cable.
    6. NOTE: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Cautions and Notices.
  6. Add new brake fluid and bleed the brake system. Refer to Hydraulic Brake System Bleeding (Manual) or Hydraulic Brake System Bleeding (Pressure) .
  7. Inspect the brake system for leaks.
scientia non olet · About LEMON Manuals