LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Data Link Communication System) >> Diagnostic Information and Procedures >> Scan Tool Does Not Communicate with Component >> Circuit Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Description

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

The provisions for communicating with the engine control module (ECM), electronic brake control module (EBCM), SIR module, immobilizer module, and the theft deterrent module are located in the data link connector (DLC). The DLC is located under the instrument panel (I/P). The 16 pin DLC provides the serial data signals at terminals 7 (ECM, TCM, immobilizer serial data), 8 (theft deterrent serial data), 12 (ABS serial data), and 13 (SIR serial data). The DLC is used to link a scan tool to the ECM, EBCM, SIR, immobilizer, and theft control modules serial data stream. Some common uses of the scan tool are listed below: