October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Engine Control Module Removal and Installation: Installation
- Connect the ECM connectors to the ECM.
- Align the ECM into the mounting base.
- Snap the ECM into its mounting base.
- Install the ECM trim locks.
- Install the air intake tube and resonator.
- Connect the negative battery cable.
- Perform a crankshaft position system variation learning procedure. Refer to "TEC (TOOTH ERROR CORRECTION) LEARN PROCEDURE
:".