Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Application | N.m | lb-ft | lb-in |
|---|---|---|---|
| Dash Seal Retaining Ring Nuts | 7 | - | 62 |
| Hydraulic Cylinder Line Fittings - Cylinder End | 28 | 21 | - |
| Hydraulic Cylinder Line Fittings - Valve End | 18 | 13 | - |
| Lower Intermediate Shaft Pinch Bolts | 25 | 18 | - |
| Outer Tie Rod Adjusting Nut | 64 | 47 | - |
| Outer Tie Rod Nuts | 50 | 37 | - |
| Steering Gear Inlet and Outlet Pipe Fittings | 28 | 21 | - |
| Steering Gear Mounting Bracket Nuts and Bolts | 60 | 44 | - |
| Transaxle Center Bracket-to-Engine Bolt | 80 | 59 | - |
| Pressure Line Fitting | 28 | 21 | - |
| Return Line Clip Bolts | 8 | - | 71 |
| Air Filter Housing Assembly Bolts | 6 | - | 53 |
| High-Pressure Hose Fitting | 28 | 21 | - |
| Power Steering Pump Bolts | 25 | 18 | - |
| Right Side Power Steering Pump Bracket Bolts | 35 | 26 | - |
| Upper Intermediate Shaft Pinch Bolt | 22 | 18 | - |
| Fluid Reservoir Nuts | 10 | - | - |
| Return Line Fitting | 28 | 21 | - |
| Pressure Line Retaining Clip Bolt | 8 | - | 71 |