Secondary Parameters And Enable Conditions

Switch ON too slow:

Enable Conditions:

No inhibition of diagnostic

Timer has run out

Main relay shall be switched ON

Diag not yet finished

Healing should be possible

SCG/OL:

Enable Conditions:

No inhibition of diagnostic

Timer has run out

Main relay shall be switched ON

System Voltage low:

Enable Conditions:

• Engine operating state (Start) = 0
• IGK = ON
• Engine operating state (engine stopped) = 0 and no main relay error
• VS >= 10 km/h

SCB:

Enable Conditions:

No inhibition of diagnostic

Timer has run out

Main relay shall be switched ON

System Voltage high:

Enable Conditions:

• Engine operating state (Start) = 0
• IGK = ON
• Engine operating state (engine stopped) = 0 and no main relay error
• VS >= 10 km/h