DTC Troubleshooting
DTC TROUBLESHOOTING CHART
| Step | Action | Value (s) | Yes | No |
|---|---|---|---|---|
| 1 | Perform an ON-BOARD DIAGNOSTIC (OBD II) SYSTEM CHECK
. Is the system check complete? |
- | Go to Step 2. | Go to ON-BOARD DIAGNOSTIC (OBD II) SYSTEM CHECK . |
| 2 | Replace the Engine Control Module (ECM). Is the replacement complete? |
- | Go to Step 3. | - |
| 3 |
Does the scan tool indicate that this diagnostic has run and passed? |
- | Go to Step 4. | Go to Step 2. |
| 4 | Check if any additional DTCs are set. Are any DTCs displayed that have not been diagnosed? |
- | Go to applicable DTC Table . | System OK |