LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> XL-7 Base, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P0660: Intake Manifold Tuning Valve Control Circuit / Open >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

DTC DIAGNOSTIC TROUBLESHOOTING CHART

Step Action YES NO
Was "Engine and Emission Control System" performed?  Go to Step 2. Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK .
Check wire circuit 
  1. Turn OFF ignition switch.
  2. Disconnect connector from IMT vacuum solenoid valve.
  3. Check for proper connection of IMT vacuum solenoid valve connector at "BLU/BLK" and "GRY/RED" wire terminals.
  4. If OK, turn ON ignition switch and measure voltage between "BLU/BLK" wire of IMT vacuum solenoid valve connector and engine ground.

Is voltage 10 - 14 V? 
Go to Step 3. Open in "BLU/BLK" circuit.
Check wire circuit 
  1. Remove ECM cover.
  2. Turn OFF ignition switch.
  3. Disconnect connectors from ECM.
  4. Check for proper connection of ECM connector at "E61-21" terminal.
  5. If OK, measure resistance between "E61- 21" terminal of ECM connector and vehicle body ground.

Is resistance infinity? 
Go to Step 4. "GRY/RED" circuit shorted to ground.
Check wire circuit 
  1. Turn ON ignition switch.
  2. Measure voltage "E61-21" terminal of ECM connector and vehicle body ground.

Is voltage 0 V? 
Go to Step 5. "GRY/RED" circuit shorted to power supply line.
Check wire circuit 
  1. Turn OFF ignition switch.
  2. Connect connectors from ECM.
  3. Turn ON ignition switch.
  4. Measure voltage "E61-21" terminal of ECM connector and vehicle body ground.

Is voltage 10 - 14 V? 
Go to Step 6. Open in "GRY/RED" circuit.
Check IMT vacuum solenoid valve performance 
  1. Check IMT vacuum solenoid valve referring to IMT VACUUM TANK ASSEMBLY INSPECTION .

Is check result satisfactory? 
Substitute a known-good ECM and recheck. Replace vacuum tank assembly.