Test Description
Number(s) below refer to the step number(s) on the Diagnostic Table.
- If the TP Indicated angle does not follow the movement of the throttle plate and no TP Sensor DTCs are set, there is a mechanical condition with the throttle shaft or the TP sensor.
- When the ECM detects a condition within the TAC system, more than 1 TAC system related DTC may set. This is due to the many redundant tests that run continuously on this system. Locating and repairing 1 individual condition may correct more than 1 DTC. Disconnecting components during testing may set additional DTCs. Keep this in mind when reviewing the Capture Info.