BARTEC TPMS Reset Procedure
- Inflate tires to correct pressure.
- Enter vehicle and close door.
- Apply parking brake (not always req'd).
- Turn ignition ON.NOTE: Door switch step (below) must be done within 15 seconds of turning the ignition on.
- Open door and exit vehicle leaving door open.
- Press hold drivers side door switch for 4 seconds.
- Release then press again for 4 seconds.
- Release switch, then press for 7 seconds.
- CLOSE DOOR.
- Place tool close to LF valve location.
- Activate sensor.
- Repeat on RF, RR, and LR.
NOTE:
TIA troubleshooting tip: Vehicle gives no indication it has entered learn mode. Ref to SUZ-2 in TIA guide for more details.