LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Power Assisted Steering System) >> Diagnostic Information and Procedures >> Diagnostic System Check-Variable Effort Steering >> Test Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Description

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

The numbers below refer to the step numbers on the diagnostic table.

  1. 2. Lack of communication may be due to a partial malfunction of the serial data circuit or due to a total malfunction of the serial data circuit. The specified procedure will determine the particular condition.
DIAGNOSTIC PROCEDURES

Step Action Value(s) Yes No
1
  1. Install a scan tool.
  2. Turn ON the ignition.
- Go to Step 2 -
2 Select the ECM display DTC function on the scan tool.
Does the scan tool display any DTCs?
- Go to Diagnostic System Check-Engine Controls. Go to Step 3
3 Select the SSPS display DTC function on the scan tool.
Does the scan tool display any DTCs?
- Go to Diagnostic Trouble Code (DTC) List. Go to Symptoms-Power Steering System.