Horizontal (Left / Right) Aiming Procedures
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ON the low beam headlamps and mark horizontal line and vertical line around high intensity zone as figure. This line is called "Cut Off Line".
- Detach horizontal aiming hold cap to be placed outside of a headlamps.
- Adjust the horizontal aiming driver with a "+" screw driver so that LINE B (vertical line of cut off line) shall be placed within 100 mm (4 in.) right and left from the vertical axis of HV point.
- Close the hood carefully and verify that the hood is securely closed.