LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Lighting Systems) >> Repair Instructions >> Headlamp Aiming >> Horizontal (Left/Right) Aiming Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Horizontal (Left/Right) Aiming Procedures

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ON the low beam headlamps and mark horizontal line & vertical line around high intensity zone as figure. This line is called "Cut Off Line".
  2. Detach horizontal aiming hold cap to be placed outside of a headlamps.
  3. Adjust the horizontal aiming driver with a "+" screw driver so that LINE B (vertical line of cut off line) shall be placed within 100 mm (4 in.) right and left from the vertical axis of HV point.
  4. Close the hood carefully and verify that the hood is securely closed.
scientia non olet · About LEMON Manuals