LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis (Single Page) >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Sensor Learn >> Scan Tool Learn Enable Method
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Scan Tool Learn Enable Method

  1. Initiate Learn Mode using the scan tool. A double horn chirp will sound indicating the Learn Mode has been enabled. The left front turn signal will also be illuminated.
  2. Starting with the left front tire, active the sensor by holding the antenna of the Activation Tool, aimed upward, against the tire sidewall close to the wheel rim at the valve stem location. Press and release the Activate button and wait for a horn chirp. Once the horn chirp has sounded, the sensor information is learned and the turn signal in the next location to be learned will illuminate.
  3. After the horn chirp has sounded and the right front turn signal is illuminated, repeat step 2 for the remaining 3 sensors in the following order:
    • Right front
    • Right rear
    • Left rear
  4. When the left rear sensor has been Learned and a double horn chirp has sounded, the Learn process is complete and the RCDLR exits the Learn Mode.
  5. Turn ignition OFF. Adjust all tires to the recommended pressures.
scientia non olet · About LEMON Manuals