Installation Procedure
- Install the window regulator module into the door.
- Connect the door harness at the door jamb.CAUTION: Refer to FASTENER NOTICE .
- Install the 3 latch bolts to the door shut face.
Tightening torque
Tighten the bolts to 10 N.m (89 lb in).
- Install the 4 module bolts.
Tightening torque
Tighten the bolts to 8 N.m (71 lb in).
- Connect the 4 electrical connector rosebuds (2 at the mirror and 2 under the speaker).
- Connect the mirror electrical connector.
- Install the front door lower speaker. Refer to RADIO FRONT SIDE DOOR SPEAKER REPLACEMENT .
- Install the front door window run channel assembly. Refer to INSTALLATION PROCEDURE .
- Install the front door outside handle. Refer to INSTALLATION PROCEDURE .