LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

Fig 1: Battery Current Sensor
G04843490Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the negative battery cable. Refer to REMOVAL PROCEDURE .
  2. Mark the location of the battery current sensor on the battery cable with tape for reference during installation.
  3. Remove the tape securing the battery current sensor to the negative battery cable.
  4. Mark the location of the negative battery cable clips and remove the clip from the cable.
  5. Squeeze the negative battery cable branches together.
    NOTE: Note the orientation of the battery current sensor prior to removal.
  6. Slide the battery current sensor (1) off of the negative battery cable.
scientia non olet · About LEMON Manuals