LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Repair Instructions >> Starter Motor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Identifying Starter Bolts (2 Of 2)
G04844202Courtesy of SUZUKI OF AMERICA CORP.
  1. Position the starter motor in the engine block.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the starter bolts.

    Tightening torque 

    Tighten the bolts to 50 N.m (37 lb ft). 

    Fig 2: Identifying Engine Harness Electrical Connector
    G04844203Courtesy of SUZUKI OF AMERICA CORP.
  3. Connect the engine harness electrical connector to the starter.
    Fig 3: Identifying Starter Solenoid BAT Terminal Nut
    G04844204Courtesy of SUZUKI OF AMERICA CORP.
  4. Install the starter solenoid BAT terminal nut.

    Tightening torque 

    Tighten the bolts/nuts to 13 N.m (115 lb in). 

  5. Install the front catalytic convertor. Refer to INSTALLATION PROCEDURE .
  6. Lower the vehicle.
  7. Connect the negative battery cable. Refer to INSTALLATION PROCEDURE .
scientia non olet · About LEMON Manuals