LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Grand Vitara 2WD V6-2.7L >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> Programming and Relearning >> Procedure After Replacing ECM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Procedure After Replacing ECM

Procedure after ECM Replacement

After ECM is replaced with new one or used one, the transponder code in the transponder built in the ignition key has to be registered with ECM. To register transponder code in the ignition key with ECM, perform "Replace New ECM" mode of SUZUKI scan tool referring to "SUZUKI Tech 2 Operator's Manual".

NOTE: A maximum of four transponder codes can be registered with ECM.
scientia non olet · About LEMON Manuals