Secondary Parameters And Enable Conditions
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
Switch ON too slow:
Enable Conditions:
No inhibition of diagnostic
Timer has run out
Main relay shall be switched ON
Diag not yet finished
Healing should be possible
SCG/OL:
Enable Conditions:
No inhibition of diagnostic
Timer has run out
Main relay shall be switched ON
System Voltage low:
Enable Conditions:
- Engine operating state (Start) = 0
- IGK = ON
- Engine operating state (engine stopped) = 0 and no main relay error
- VS >= 10 km/h
SCB:
Enable Conditions:
No inhibition of diagnostic
Timer has run out
Main relay shall be switched ON
System Voltage high:
Enable Conditions:
- Engine operating state (Start) = 0
- IGK = ON
- Engine operating state (engine stopped) = 0 and no main relay error
- VS >= 10 km/h