LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> SX4 4WD L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Knock Sensor: Service and Repair

Knock Sensor Removal and Installation

Removal

1. Disconnect negative cable at battery.
2. Hoist vehicle.
3. Remove right side drive shaft referring to Front Drive Shaft Assembly Removal and Installation:Front.
4. Disconnect knock sensor connector (1).
5. Remove knock sensor (2) from cylinder block.

Installation

Reverse removal procedure for installation.




Tightening torque
Knock sensor a: 22 Nm (2.2 kg.m, 16.0 ft. lbs.)
scientia non olet · About LEMON Manuals