Procedure After Replacing ECM

Procedure After Replacing ECM

When replacing ECM, the following procedure must be performed.
1. Perform initialization of immobilizer system and registration of all immobilizer system ignition key IDs. Refer to [Additional Service When Replacing Control Unit: Special Repair Requirement].
2. Perform "VIN Registration" in [Procedure After Replacing ECM]. VIN Registration
3. Perform "Accelerator Pedal Released Position Learning" in [Procedure After Replacing ECM]. Testing and Inspection
4. Perform "Throttle Valve Closed Position Learning" in [Procedure After Replacing ECM]. Programming and Relearning
5. Perform "Idle Air Volume Learning" in [Procedure After Replacing ECM]. Programming and Relearning