LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> Equator RMZ-4 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (VQ40DE) - (2 Of 5) >> DTC P0453: EVAP Control System Pressure Sensor >> DTC Confirmation Procedure >> With SDT
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With SDT

  1. Start engine and warm it up to normal operating temperature.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON.
  4. Turn ignition switch OFF and wait at least 10 seconds and then turn ON.
  5. Select "Data list" mode with SDT.
  6. Check that "FUEL T/TMP SE" is more than 0°C (32°F).
  7. Start engine and wait at least 20 seconds.
  8. Check 1st trip DTC.
  9. If 1st trip DTC is detected, go to [P0453 EVAP CONTROL SYSTEM PRESSURE SENSOR ].
scientia non olet · About LEMON Manuals