LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> XL7 Limited, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

Fig 1: Identifying Crankshaft Position Sensor Bolt
G05469875Courtesy of SUZUKI OF AMERICA CORP.
  1. Install the crankshaft position sensor.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the crankshaft position sensor bolt.

    Tightening torque 

    Tighten the bolt to 10 N.m (89 lb in). 

    Fig 2: Identifying Engine Wiring Harness Electrical Connector
    G05469876Courtesy of SUZUKI OF AMERICA CORP.
  3. Connect the engine wiring harness electrical connector to the CKP sensor.
  4. If equipped with all AWD, install the transfer case. Refer to TRANSFER CASE ASSEMBLY REPLACEMENT .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals