October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
Courtesy of SUZUKI OF AMERICA CORP.
- Slide the ECM into the retainer until the clips (1) engage the ECM.
Courtesy of SUZUKI OF AMERICA CORP.
- Grasp the ECM retainer and slide the retainer forward until the retainer locks against the 4 clips on the battery cover.
Courtesy of SUZUKI OF AMERICA CORP.
- Connect the engine wiring harness electrical connector (2) to the ECM.
- Connect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION
.
- If a NEW ECM was installed, reprogram the ECM. Refer to ENGINE CONTROL MODULE PROGRAMMING AND SETUP (V6) .