LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Security And Locks) >> Diagnostic Information and Procedures >> Liftgate Release Inoperative >> Component Testing >> Liftgate Latch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Liftgate Latch

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the liftgate latch.
  2. Install a 15-amp fused jumper wire between the control circuit terminal 1 and 12 volts. Install a jumper wire between the ground circuit terminal 3 and ground. Verify the release actuator activates.
    • If the actuator does not perform as specified, replace the liftgate latch.
scientia non olet · About LEMON Manuals