LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Lubrication System) >> Repair Instructions >> Oil Pump Suction Pipe and Screen Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Oil Suction Tube Seal
G04842509Courtesy of SUZUKI OF AMERICA CORP.
  1. Install a NEW oil suction tube seal onto the oil suction tube. DO NOT reuse the old oil suction tube seal.
    Fig 2: Identifying Oil Suction Pipe Bolts With Suction Pipe
    G04842510Courtesy of SUZUKI OF AMERICA CORP.
  2. Install the oil suction pipe.
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the oil suction pipe bolts.

    Tightening torque 

    Tighten the oil suction pipe bolts to 10 N.m (89 lb in)  .

    Fig 3: Identifying Oil Pan Scraper Bolts With Scraper
    G04842511Courtesy of SUZUKI OF AMERICA CORP.
  4. Install the oil pan scraper.
  5. Install the oil pan scraper bolts.

    Tightening torque 

    Tighten the oil pan scraper bolts to 10 N.m (89 lb in)  .

  6. Install the oil pan. Refer to OIL PAN REPLACEMENT .
scientia non olet · About LEMON Manuals