Terminal Arrangement of P/S Control Module Coupler (Viewed from Harness Side)
TERMINAL ARRANGEMENT OF P/S CONTROL MODULE COUPLER
| Terminal | Circuit | Terminal | Circuit |
|---|---|---|---|
| E11-1 | Ignition switch signal for P/S control module | E11-13 | - |
| E11-2 | - | E11-14 | P/S active signal (idle up signal) |
| E11-3 | - | E11-15 | - |
| E11-4 | Vehicle speed signal | E11-16 | - |
| E11-5 | "EPS" warning light | E11-17 | - |
| E11-6 | - | E11-18 | Torque sensor signal (Main) |
| E11-7 | - | E11-19 | Ground for shield wire |
| E11-8 | 9 V power supply for torque sensor | E11-20 | Reference sensor power supply for torque sensor |
| E11-9 | Ground for torque sensors | E12-1 | Motor output 1 |
| E11-10 | Torque sensor signal (Sub) | E12-2 | Motor output 2 |
| E11-11 | Serial communication circuit for DLC | E13-1 | Main power supply for internal memory and EPS motor |
| E11-12 | Engine speed signal | E13-2 | Ground for P/S control module |