Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Powertrain Control Module (PCM), Battery Box Cover And Removal Direction

Courtesy of SUZUKI OF AMERICA CORP.

Remove the powertrain control module (PCM) (2) from the battery box cover (1) and relocate to the side.

Fig 2: Locking Tab, Battery Box Lid And Alignment Tabs
Courtesy of SUZUKI OF AMERICA CORP.
Release the locking tab (1) on the side of the battery box.
Release the alignment tabs (2) on the front of the battery box.
Remove the battery box lid (3).

Fig 3: Positive And Negative Battery Cables
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the positive and negative battery cables. Refer to BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION .

Fig 4: Battery, Battery Hold Down, Bolt And Washer
Courtesy of SUZUKI OF AMERICA CORP.
Remove the battery hold down bolt (5), battery hold down (4), and washer (3).
Remove the battery (1).