Programming and Relearning

Keyless Start Control Module Registration

After keyless start control module is replaced with new one, register remote controller ID code in keyless start control module using SUZUKI scan tool and immobilizer cable.
1) Prepare all of remote controllers ready for registration.
2) Perform "Immobilizer Key Registration" in "Immobilizer" menu indicated on SUZUKI scan tool. Refer to "SUZUKI SDT Immobilizer Control System Operator's Manual".

NOTE:

When ECM and keyless start control module are replaced with new ones at the same time, perform "Immobilizer Key Registration" instead of "ECM Registration" using SUZUKI scan tool and immobilizer cable. Refer to "SUZUKI SDT Immobilizer Control System Operator's Manual" for the immobilizer registration.