| TEMP CONT SWITCH: (Temperature control selector position, MAX cool, °C/°F, Max hot) |
This parameter indicates the selected position of temperature control selector. |
| MODE CONT SWITCH (Air flow selector position, AUTO, FACE, B/L, FOOT, DE - FO, DEF) |
This parameter indicates the selected position of air flow selector. |
| FAN CONT SWITCH (Blower speed selector, AUTO, OFF, 1st - 8th) |
This parameter indicates the selected position of blower speed selector. |
| AIR INTAKE MODE (Air intake selector position, AUTO, FRE, REC) |
This parameter indicates the selected position of air intake selector. |
| VEHICLE SPEED (km/h, mph) |
This parameter indicates the vehicle speed calculated by ECM. |
| ECT (Engine Coolant Temperature ° C, °F) |
This parameter indicates the engine coolant temperature detected by engine coolant temperature sensor. |
| ENGINE TYPE (Engine type signal, J24B) |
This parameter indicates the engine type signal transmitted by ECM. |
| OUTSIDE AIR TEMP (Outside air temperature, ° C, °F) |
This parameter indicates the outside air temperature detected by outside air temperature sensor. |
| CABIN TEMPERATURE: (In-car temperature, ° C, °F) |
This parameter indicates the in-car temperature detected by inside air temperature sensor. |
| SUN LOAD (W/m 2
) |
This parameter indicates the amount of sunlight detected by sunload sensor. |
| EVAPORATOR TEMP (Evaporator temperature, ° C °F) |
This parameter indicates the temperature of air passed through evaporator. |
| REFRIGERANT PRESSURE (A/C refrigerant absolute pressure, kPa) |
This parameter indicates the A/C refrigerant absolute pressure calculated by ECM. |
| AIR MIX POS SENSOR (Temperature control actuator position sensor, V) |
This parameter indicates the input signal from position sensor in temperature control actuator. |
| MODE POS SENSOR (Air flow control actuator position sensor, V) |
This parameter indicates the input signal from position sensor in air flow control actuator. |
| R/F POS SENSOR (AIR INTAKE CONTROL ACTUATOR POSITION SENSOR) |
This parameter indicates the input signal from position sensor in air intake control actuator. |
| FAN DESIRED VOLT (Fan desired voltage, V) |
This parameter indicates the consumption voltage of blower motor. |
| A/C CONT SIG (A/C control signal, ON, OFF) |
This parameter indicates the state of A/C indicator. |
| REAR DEF INDICATOR (Rear DEF indicator, ON, OFF) |
This parameter indicates the selected position of rear defogger switch. |
| A/C COMP CLUTCH (A/C compressor magnet clutch, ON, OFF) |
This parameter indicates the state of the A/C compressor magnet clutch. |