LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Electronic Stability Program) >> Diagnostics Information and Procedures >> DTC C1093: 4WD Control Module Data in CAN Line Failure >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTICS PROCEDURE CHART

Step Action YES NO
1  Was ESP® System Check performed?  Go to step 2. Go to ESP® SYSTEM CHECK .
2  DTC check 
  1. Perform DTC CHECK .

Is there DTC(s) other than C1093? 		 Go to APPLICABLE DTC TROUBLESHOOTING . Go to Step 3.
3  DTC check for 4WD system 
  1. Check DTC for 4WD control module.

Is any DTC(s) detected? 		 Go to APPLICABLE DTC TROUBLESHOOTING . Substitute a known-good 4WD control module and recheck DTC.
Substitute a known-good ESP® control module if DTC C1093 is still detected, see ESP® Hydraulic Unit/Control Module Assembly Removal and Installation .
scientia non olet · About LEMON Manuals