DTC Detecting Condition and Trouble Area
DTC DETECTING CONDITION CHART
| DTC detecting condition |
Trouble area |
DTC P0826: Manual Mode Control Switch Circuit
This DTC is detected if any one of the following conditions is met.
- Manual mode switch ON signal continues to be input for longer than 5 sec. even after "P", "R" or "N" range signal input.
- ON signal of manual shift-down switch or manual shift-up switch is input for longer than 5 sec. even while manual mode switch is OFF.
(1 D/C detection logic but MIL does not light up) |
- Manual mode shift switch (include manual mode switch, manual shift-up switch and manual shift-down switch) and/or its circuit
- TCM
|