LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Electrical Devices >> Repair Instructions >> ECM Removal and Installation >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

ECM Removal and Installation: Removal

  1. Disconnect negative (-) cable at battery.
  2. Disconnect connectors from ECM as follows.
    1. Push lock (1) to release locking of lock lever (2).
    2. Turn lock lever in arrow direction until it stops.
      Fig 1: Pushing Lock Lever
      G06528114Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove ECM (2) and bracket (3) from front fender bracket and battery tray by removing their mounting bolts (1).
    Fig 2: Identifying ECM, Bracket And Mounting Bolts
    G06528115Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove ECM from bracket by removing ECM mounting nuts.
scientia non olet · About LEMON Manuals