LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Aux. Emission Control Devices >> Repair Instructions >> EVAP Leak Check Module Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EVAP Leak Check Module Inspection: Notes

Check each component as follows.

CAUTION:
  • The connectors of the ECM are watertight. If tester probes are directly connected to any of the connectors when checking the ECM and its circuits, the watertight performance of the connector will be affected, possibly resulting in corrosion of connector terminals and damage to electrical circuits. Always use the special tool when checking the ECM and its circuits. Connect tester probes only to the special tool's connectors.
  • If you connect a voltmeter or ohmmeter directly to ECM terminals by removing ECM connectors, you can damage the control module. Never connect a voltmeter or an ohmmeter directly to any terminal of ECM by disconnecting ECM connectors.
NOTE: For operation of EVAP leak check module, refer to EVAP LEAK CHECK SYSTEM DESCRIPTION .
scientia non olet · About LEMON Manuals