Lock/Unlock with Keyless Entry System
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
When all of the following conditions are met and the lock or unlock signal from remote controller is inputted into keyless start control module via keyless entry/TPMS receiver, keyless start control module outputs door lock/unlock request signal (depending on the door lock switch state) to BCM through CAN communication. When BCM receives signal, it activates each door lock actuator.
- Ignition mode is "OFF".
- All doors are closed. (When locking doors)